Contact Information
Toll Free
800-998-4031
- Telephone
- FAX
- Postal address
Baton Rouge, LA 70806
- Electronic mail
Copyright © 2007
ShapeTech
All rights reserved.
Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.(ShapeTech is a Trade Name of LPCII, LLC)
Above machine is the "AccuLiner" shape cutting machine with High Speed Spiral Cutting Saw, AccuDrive HD-750 Servo drive system, Rack and Pinion for Traverse and Rail Axis with energy chain, ST1002 Pneumatic lifter, PicoPath CNC controller, and 60" X 120" AstroTurf cutting table.
Photograph courtesy ShapeTech : Baton Rouge, LA
Contents:
 | ProLiner Summary |
| Key Features |
| Specifications |
ProLiner Summary
The "AccuLiner" Plasma Shape Cutting Machines
Welcome to the future of Shape Cutting Technology with the introduction of the "AccuLiner" shape cutting machine. Finally a machine designed for maximum versatility for operation, productivity, speed and performance. Models with speeds from 1000 IPM to an unbelievable 2500 IPM traverse speeds with cutting capabilities up to 2 inch material. The "AccuLiner" has a standard cutting width of 60 X 120 inches. The "AccuLiner" brings a new dimension to Acoustic Liner cutting machines with our "Smart Interface", "Linear Positioning Crossdrive System", Rack and Pinion drive System and our new Aluminum frame design. The "AccuLiner" will come complete with CNC controller, Servo Drive System, Spiral Cutting Saw, OEM Posting Software and Cutting table. All this and starting with a price tag of only $32,995.00 the "AccuLiner" will truly out perform it's competition.
"ShapeTech will always strive to give our customers the finest in quality and workmanship."
Key Features
| Aluminum frame design The Aluminum frame design of the "AccuLiner" provides many benefits such as an overall lighter weight allowing the "AccuLiner" to have faster acceleration, greater speeds, and better corner performance. The wide footprint and tapered back brace allow the "AccuLiner" to be stable over the full speed range of the machine giving it unequaled performance. The spiral brushed Aluminum frame does not peel or crack like other painted machines. This allows the "AccuLiner" to be cleaned easier and maintain a long attractive life span. |
| Linear Positioning Crossdrive
System The “Linear Positioning” Crossdrive system was engineered to be stable and accurate. By engineering a more efficient motor transport system while still maintaining our Rockwell C60 linear V-rails and our compact carriage assembly. The "AccuLiner" is another reason why ShapeTech shape cutting machines are creating new standards in machine performance. |
| Innovations Update your "AccuLiner" to the "MasterHVAC" and this will give you the lowest priced Plasma with Liner cutting system on the market. This twin table cutting system gives superior performance while handing all of your cutting needs. All this with a price tag under 40 thousand it's no wonder the ShapeTech shape cutting machines are so versatile. |
| Savings, Performance, Production The "AccuLiner" Shape Cutting Machine is a Gantry machine that uses only 20% more space than its own cutting width, and was designed especially for "High Speed Cutting". This new design gives increased stability over the full speed range of the machine. With speeds available up to 2500 IPM, this can make a real difference in productivity and performance. |
| Custom Sizes The "AccuLiner" has a standard cutting width of 60 X 120 inches. You can also order the "AccuLiner II" with a 60" X 240" cutting table |
Specifications
Standard "AccuLiner" Includes:
User Friendly PicoPath CNC control
ShapeTech AccuLiner Aluminum Frame
ShapeTech 1002 Adjustable Pneumatic Lifter
IGUS X and Y axis Energy Chain
Traverse travel Speeds up to 2500 IPM
High Speed Spiral Cutting Saw cutting system
AccuDrive 750watt 19khz PWM Servo Drive system
ShapeTech Rack and Pinion gear system
ShapeTech Heavy Duty Steel Rail and Table Frame
Adjustable CNC mount for 0deg., 15deg., and 30deg. tilting
60" X 120" Ergonomic designed table sealed and covered with AstroTurf
4 Anti-vibration adjustment pads for precise leveling of equipment
Set up for RS-232 DNC communication
*(Ask about our software special)
Power Requirements:
Single or Three phase power for plasma (depending on plasma ordered (Electrician required))
Single Phase 120volt A/C 60cycles for electronics on machine (Electrician required)
View or Download